Industrial Floor Washing Machine Epoxy Floor Paint Floor Recommended Floor Washing Truck

How to choose a floor washer for epoxy floor paint of industrial floor washer: according to the cleaning area, the cleaning area of hand-propelled floor washer can reach more than 1,500 square meters per hour, and the driving cleaning area can reach more than 5,000 square meters. In addition, if there is an aisle in the middle of the garage to be cleaned or the vehicle limit stop is narrow, you can choose a small floor washer, and it is difficult to pass a too large width of the floor washer.

In addition to cleaning the garage, the floor washer for epoxy floor paint of industrial floor washer is also very useful for many factory workshops. When vehicles, forklifts, forklifts and workers enter and leave the production workshop, it is easy to bring sand, dust and oil stains into every corner of the whole workshop from the outside. Manual cleaning not only has long inefficient working hours, but also wastes a lot of effective human resources. Unclean cleaning affects the working environment and causes large-scale wear on the epoxy floor. Invest in a washing machine for cleaning. The washing machine can effectively improve the working environment. The washing machine can simulate the whole cleaning process and is an automatic cleaning equipment for cleaning and sucking sewage.

Material selection of floor washer accessories for industrial floor washer epoxy floor paint floor: epoxy floor is relatively expensive, so generally, the floor washer in epoxy garage needs to use a soft brush plate and a clean pad when cleaning. This will cause less damage to the ground, and will not scratch the ground, which will affect the beauty of the ground. When the floor washer is used in workshops, shopping malls, laboratories and parking lots, there is only general garbage and dust, so it is not necessary to add cleaning agent. If there is oil pollution, it can be properly added with cleaning agent, and the cleaning effect is better. In addition, after cleaning the floor washer in epoxy garage, the water suction scraper and the washing plate should be cleaned, the sewage and the remaining cleaning agent should be poured out, and the water tank should be rinsed and naturally dried, and then it should be put away and fully charged for the next use.