
- HOME
- >
- News
- >
- Industry news
Sweeper component configuration
2024-07-30 15:07Sweepers are now in a period of rapid development and have a very broad development space. There are 4 sweeping brushes installed on the sweeper, with a suction nozzle at the rear. The front sweeping brushes on the left and right sides sweep the garbage in the corners from the outside to the inside, and sweep the garbage to the middle brush to play a cleaning process. The middle brush clears the garbage to the front of the suction nozzle, and then the suction nozzle sucks the garbage into the garbage box for storage.
In order to reduce the secondary dust pollution during the cleaning process, the sweeper is equipped with water nozzles on the left and right front sweeping discs to produce spray, thereby achieving the effect of dust suppression. Because the sweeper only produces a simple dust suppression effect by spraying the water nozzle above the sweeping disc during the cleaning process, there is no relevant filtering effect inside the box, so some dust will be swept from the fan outlet to produce secondary dust pollution. Therefore, the sweeper is more suitable for places where there is not much dust on the road.