What are the daily accessories of the washing machine?

Whether it's a hand-propelled or a driving washer, because of its working principle and body mechanism, when we use the washer in daily life, its accessories will be more or less worn, and when it reaches a certain level, it needs to be replaced on time. So what accessories do we usually need to replace?

1. Brush plate, as a part of the washing machine that directly rubs against the ground, is the fastest to wear. Therefore, when we use the brush plate, we should observe the wear degree of the brush wire of the brush plate so as to replace it in time.

2. The needle plate and the scouring pad need to be used together. Their working principle is the same as that of the brush plate, and they are the parts that contact and rub between the machine and the ground. So it is also necessary to observe the degree of wear and tear in time.

3. Water-absorbing rubber strips, like the previous two points, are the three fastest-wearing parts in the daily wear and tear parts of the washing machine. When the water-absorbing adhesive tape is worn to a certain extent, it will affect the water-absorbing effect, so when the water-absorbing adhesive tape is not obvious and the edge of the adhesive tape is serious, it needs to be replaced in time.

4. As the channel for sewage recovery and discharge, the exhaust and suction pipes are not in direct contact with the ground, and the consumption is very small under the condition of proper maintenance. Our company has customers who have used the floor washer for 2 or 3 years, and all of them will not be replaced. However, it should also be noted that if the pipe wall is damaged, it needs to be replaced in time, otherwise it will affect the pollution absorption effect.

5. Splash-proof rubber strip, as a part to prevent water droplets from splashing when the washing machine is working, has been cancelled in some manufacturers' models because of the design of the fuselage structure.

6. Battery, as the power source of the floor washer, will be in the process of continuous attenuation at the moment when the machine is started, and the duration of this process varies according to the type of battery. Maintenance-free batteries, which are widely used at present, can usually be used for more than 2 years. 7. Others include clean water filters, motors, boxes, lifting components, etc. Because of the relationship with the quality used by the manufacturer and the structure of the fuselage, there is less chance of replacement.